Signature Series [Birdseye Maple | 10-Ply]
    Signature Series [Birdseye Maple | 10-Ply]

SpeciesBirdseye Maple

Birdseye Maple is not a distinct species of Maple, but is instead named for its growth/grain anomaly. Known for its rare, decorative properties, Birdseye Maple is a wonderful option for a truly unique shell aesthetic. Colors can range from creamy, light amber to deep, reddish and dark brown hues. Our Maple is hand-selected and rotary cut to our desired thickness from the forests of Michigan.

Configuration
Birdseye Maple / Maple(9) - 10ply
Thickness
10ply = 6.8 mm
Origin
Michigan
Hardness Level
1450
Sustain
Long
Tone
Bright, Mid-low

Signature Series

Finally a timeless, elevated look and sound is accessible to boutique builders with the Signature Series, a line made exclusively of a unique range of high-quality exotic woods.

Configure: Birdseye Maple

Birdseye Maple Bubinga Curly Maple Waterfall Bubinga

Ply Count 10-Ply

10-Ply

Diameter 14”

Depth 5”

-
+
$144.00 +
OPTIONAL ADDITIONAL SERVICESLearn More About Services
-
+
$144.00 +



Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Signature Series

The Signature Series

An Exotic Range of High-Quality Woods

The Signature Series is a premium line of exotic shells that are unmatched in the industry. The quality of wood selection (hand-selected grade A exotics), the range of species available and our proprietary shell process allow us to make unique shell products accessible to boutique builders one-at-a-time or in bulk. Whether you’re looking to create a “collector series” caliber drum or want to develop your own stunning product line, this is the series for you.

The quality of the woods have been great, no separations and beautiful veneer. And you guys save us 3 hours by cutting a straight edge on the ply sheets.

Bill Cardwell, Owner of C&C Drum Co.

Working directly with Nordic has been essential, they perfectly fit our approach and share our values. With both look and sound, Nordic shells are at the heart of what we do.

Lane Pederson, Co-Owner of Twin Cities Drum Co.

I have been working very close with Nordic for several years now. Customer service is unmatched and the quality is top shelf. You will not find a better shell for your build.

Bill Detamore, Founder of Pork Pie Percussion

Nordic has changed the game in the high quality custom drum shell world, and their True Series off-the-shelf stock is out of control. These shells not only look beautiful but sound amazing!

Preston Parsons, Owner of Vessel Drum Co.

These shells are AMAZING! I absolutely LOVE them. I'm very excited that I am now using Nordic Shells exclusively.

Swede Grooms, Owner of Swede Custom Drums

We purchase the majority of our shell making veneers from Nordic. The quality is top notch as is the customer service. This has allowed us to take our own shell making to the highest level possible.

Christopher Carr, Owner of Bucks County Drum Co.

We source 90 percent of our veneers for the fabrication of Rukus drum shells from Nordic. The quality and consistency provide peace of mind during our shell making process. Professional service from order to delivery.

Peter Lazos, Owner of Rukus Drums

Green Room

business resources
learn more

Instagram

behind the scenes

sneak a peek

Blog

industry news

get the scoop