True Series

The True Series is an industry game changer! Until now, boutique drum companies never had access to so many choices. The True Series offers the industry’s only shell made out of a single grade and species throughout the entire product (offered in six different woods). No cheap core made of low grade species; just a pure, best-grade wood shell of your choice. Get true resonance of your desired wood species with a True Series drum shell.

    True Series [Ash | 8-ply]
    True Series [Ash | 8-ply]
    True Series [Ash | 8-ply]
    True Series [Ash | 8-ply]

True Series - Ash

Shell Thickness
6ply = 4.3 mm
8ply = 5.7 mm
10ply = 7 mm
12ply = 8.4mm
Configuration
All Ash

Species

Ash is a practical wood due to its strength, hardness and weight. When used as core or as part of a combination of plys, it can add strength and durability to your shell.

Shell Thickness
6ply = 4.3 mm
8ply = 5.7 mm
10ply = 7 mm
12ply = 8.4mm
Configuration
All Ash
Origin
Upper Midwest
Hardness Level
1320
Tone
Bright, Crisp, Loud
Sustain
Medium
Additional Info

ASH - 8 ply

Made exclusively of best grade Northern Ash, the True Series amplifies the wood’s character and creates a pure tone and resonance true to its species.

Ash wood is desirable for drum shells because it offers a great balance of strength, light weight, and resonance, producing a warm sound with pronounced high and mid-range tones, making it a good choice for a versatile drum with good projection and durability; it also has a favorable strength-to-weight ratio, similar to its use in guitars.

SHELL LEAD TIME: 5-10 business days
SHELL LEAD TIME w/SERVICES: An additional 5-7 business days

*We make your order from scratch so be mindful of lead times. You’ll receive an email with FedEx tracking info once it’s boxed and ready to ship.

*All shells come standard as unsanded for maximum material for finishing. Sanding services available below.

Configure: Ash

Ash Birch Cherry Mahogany Maple Walnut

Ply Count 8-ply

6-Ply 8-Ply 10-Ply

Diameter 8”

Depth 5”

-
+
$59.00 +
OPTIONAL ADDITIONAL SERVICESLearn More About Services
-
+
$59.00 +



Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.

Products are cut according to the size indicated above, but are shipped raw to maintain affordable pricing for our customers. This also allows our customers to finish the product exactly as desired. Products may contain markings from the mill or slight amounts of glue from the manufacturing process, but can be easily removed prior to finishing.

We try very hard to eliminate any glue remnants. However, should you find any glue remnants on your Nordic product, it can be easily addressed during preparation, prior to finishing the product. To easily peel off the glue remnants, simply soak a small rag in acetone and place over the glue for about 10 mins.

It is important to always sand the product before finishing with paint, stain or clear coating. Start with 150 grit and gently sand the product a couple times. A final sanding can be done using 220 grit, but it is not recommended to go beyond 220 (the wood pores will close making it harder for stain to permeate). And finally, keep in mind that this is a natural product and will not always be perfectly uniform.